Clothing Manufacturer in Atlanta Ga to Serve Your Clothing Brand
If you are looking to start a fashion clothing brand in Atlanta, Mega Apparel is the perfect clothing manufacturer for you. We offer the best possible production solutions and a wide variety of fashion apparel to help you launch your clothing line successfully. We take your financial burdens away by offering market-competitive prices.
Our Top-of-The-Line Clothing Products
Every piece is made to your spec. These are not blanks with a print on top.
Custom T-shirts
Ring-spun cotton, cotton-poly, and tri-blends from 140 to 220 GSM, side-seamed or tubular, with garment dye and enzyme wash options for a softer, faded finish. The category that carries most Atlanta merch programs.
Custom Hoodies
French terry from 280 GSM up to heavyweight fleece at 500 GSM, pullover or full zip, with double-lined hoods and ribbed cuffs knitted with elastane so they still grip after twenty washes.
Custom Jeans
Rigid and stretch denim from 9 to 14 oz with your choice of wash, whiskering, distressing, and hardware. Custom leather or PU waistband patches are made in house.
Custom Sportswear
Poly-spandex and nylon-spandex performance wear with moisture-wicking and quick-dry finishes, flatlock seams, and sublimated team graphics that will not crack.
Custom Swimwear
Recycled four-way stretch poly and nylon, bonded or stitched, with laser-cut detail, lining, and seam-to-seam sublimation.
Custom Lingerie
Power mesh, microfiber, and lace with soft-touch elastics, hook-and-eye hardware, and cup construction are produced on separate blocks rather than scaled patterns.
Custom Caps and Headwear
.webp)
Structured and unstructured six-panel caps, trucker caps, and beanies with 3D puff embroidery, woven patches, or leather patches. Almost every Atlanta merch program adds a cap.
Custom Uniforms
.webp)
Staff shirts, aprons, scrubs, and branded polos for restaurants, salons, studios, and service businesses across the metro.
Custom Formal & Occasion Wear
.webp)
Bridal, prom, homecoming, and quinceañera pieces are produced to your spec for the buyers who work the formal market side of AmericasMart.
Custom Bags & Accessories
Canvas totes, drawstring bags, and duffels in organic and recycled canvas. Low unit cost, high perceived value, and an easy add-on to a tee program.
Who We Produce for in Atlanta
Atlanta puts more clothing into the world through culture and institutions than through retail alone. These are the briefs that reach us most often from this city.
- Streetwear and contemporary labels, the category Atlanta exports better than almost any other US city.
- Boutique owners and AmericasMart exhibitors building a house label to sit alongside the lines they buy.
- Music, entertainment, and tour merch, where artwork changes fast and the drop date is fixed.
- Film and television productions, crew apparel, and wrap gifts, which Georgia produces year-round.
- HBCUs, alumni groups, and Greek organizations, particularly around homecoming.
- Churches and ministries running apparel programs and event kits.
- Gyms, studios, running clubs, and youth sports leagues across the metro.
- Corporate teams ordering branded apparel and conference merch.
- Restaurants, barbershops, salons, and studios with a house shirt that sells at the counter.
- Ecommerce sellers on Shopify and Amazon who need repeatable reorders rather than one drop.
Best Fashion Designing Services for You
No tech pack, no problem. Most brands that come to us have a mood board, a few reference garments, and a clear idea of the customer, which is enough to start.
Our design team turns that into digital mockups and a technical pack covering measurements with tolerances, fabric composition, GSM, Pantone TCX references, trims, stitching, and label placement. You own that tech pack. If you ever move production elsewhere, it goes with you.
Complete and Limitless Customization Options to Make Your Products Unique
We run every decoration method in house, so we can tell you which one suits your artwork rather than pushing whichever machine is free.
- Screen Printing: Plastisol for bright opaque graphics, water-based, and discharge for a soft print that sits in the fabric. Best value above about 100 pieces per design.
- DTG and DTF: For photographic artwork and short runs where a screen setup does not pay for itself.
- All-over sublimation: For seam-to-seam graphics on polyester.
- Embroidery: Flat, 3D puff, tonal, and applique, up to 15 thread colors.
- Specialty Prints: Puff print, high density, foil, and reflective for streetwear graphics.
- Fabric dyeing and garment wash: Garment dye, pigment dye, acid wash, enzyme wash, tie-dye, and stone wash.
- Trims: YKK zippers, custom drawcords, metal tipping, woven patches, leather patches, and silicone badges.
Cut and Sew Manufacturers Atlanta with Promising Production Solutions
"Cut and sew” means the garment is built from a pattern rather than bought as a blank. You control the block, the panel shapes, the seams, and the fit, which is the only way to own a silhouette nobody else is selling.
It works in one of two directions. Either you send a tech pack and we produce to it, or you send a garment you want beaten, and we reverse engineer the pattern, identify the fabric, and sample it side by side against the original. The second route is faster, and it is how most brands start. Fabric is inspected on the four-point system before cutting, shrinkage is tested after washing, and measurements are audited across the full graded size range rather than the middle size only.
Clothing Manufacturing Services with Reasonable Pricing and MOQ
Mega Apparel always keeps its customers within budget and investment. Our prices of products and services are what make us the best in business. We offer affordable costs and a very reasonable minimum order quantity so clients can turn their idea of launching a brand into a beautiful reality. Our MOQ is 35 to 50 pieces, based on the product type, designs, and colors.
Private Label and Packaging
Every order ships under your brand. Nothing in the carton points back to us.
We produce woven, satin, Tyvek, printed, and tagless heat transfer labels, plus hang tags in any shape and stock. Care and content labels are printed with fiber content, country of origin, and care symbols in the format US retail expects under the FTC Care Labeling Rule. Send us your RN number and we will print it.
Packaging runs the same way. Branded poly bags, custom mailers, boxes, and UPC or EAN barcodes applied per unit, with cartons marked to your packing list. If the goods are going to a boutique account or into Amazon FBA, say so at the quote stage so barcode placement is built into the run rather than fixed in a warehouse afterwards.
Frequently Asked Questions
Can you have my order ready for an AmericasMart market?
Usually, if you start in time. Samples take 15 to 20 business days, bulk takes 20 to 25 business days after sample approval, and freight adds 6 to 10 days by air or 30 to 40 by sea. Tell us which market you are aiming at, and we will build the schedule backwards and tell you honestly whether it is achievable.
What is your minimum order?
35 to 50 pieces per product, depending on product type, design, and colors.
How much does it cost to produce a clothing line?
It depends on fabric, quantity, decoration, and construction more than on the style itself. The same t-shirt can cost three dollars or twelve. Send a spec or a reference garment, and you will get a real number within two working days rather than a range.
Do you work with startups or only established brands?
Both. A large share of our clients are on their first production run, which is exactly why the minimum starts at 35 pieces rather than 300.
Can you match a garment I already sell?
Yes, and it is the easiest brief to work from. Send the garment. We reverse engineer the pattern, identify the fabric and weight, and produce a sample you can compare side by side against the original.
Who owns the patterns and tech pack?
You do. If you ever move production elsewhere, your tech pack, patterns, and specs go with you.